Filter
Top Products
as an option on some vehicles.This type of windshield makes
any dash,visor or windshield mounted detector ineffective.
(If in doubt,check with an appropriate dealership to see if
this applies to your vehicle.) To achieve optimum performance,
regardless of which mounting position you choose, follow
the basic steps on the following page.
1. Consider occupant safety when selecting a mounting location.
Choose a location where the unit will not be hazardous in
case of an accident.
2. For optimum detection,position your unit with a clear,
unobstructed view of the road from the front and rear.
3. Do not allow the unit to make contact with the windshield.
This will eliminate unnecessary vibration.
4. Avoid placing your unit in direct sunlight.During the summer,
interior temperatures of an enclosed vehicle can sometimes
reach temperatures that will cause premature aging of the unit.
5. Your detector is not waterproof; exposure to water may cause
damage and your warranty will be void.
Dash Mounting
You can mount your unit to a level area of your vehicle’s dash
using the hook and loop fastener or the four,non-skid dash
mounting pads provided.
Windshield Bracket Assembly
The visor clip is fully
assembled.To assemble the
windshield bracket,follow the
diagram.
Windshield Mounting
1. Remove the mounting bracket
cover on top of the unit by
pressing on the raised dots and
pushing outward.Store the cover in a safe place.
Windshield Bracket Assembly