Filter
Top Products
2. Clean the selected windshield area,position the suction-cup
mount on the windshield,and press firmly on each suction
cup to secure it in place.
3. Use a screwdriver or a small coin to adjust the angle of the
suction-cup mount until the base plate is level.
4. Slide detector onto base plate until it snaps into place.
Note—some vehicles have a plastic coating on the inside of the
windshield designed to protect occupants in case of an accident.
Use of the windshield bracket on this type of windshield can
permanently mark the surface.Check with your dealer if you
are unsure whether your vehicle is equipped with this type of
windshield.
Visor Mounting
1. Remove the mounting bracket cover by pressing on the
raised dots and pushing outward.Store the cover in a
safe place.
2. Slide the visor clip onto the top of the detector until it snaps
into place.Clip the detector to the edge of the sun visor nearest
the windshield.