User Guide P. 7
Ignition Valet
The system can be placed in Valet Mode to disable the remote starting capabilities. If the
vehicle needs to be serviced, or if you park it indoors, Valet Mode will prevent the engine
from being accidentally started by remote control.
To ENTER Valet Mode
1. With the key in the Ignition switch, turn the key to the ON (RUN/IGNITION) and then OFF
positions 5 times within 10 seconds.
2. The Parking Light will flash 3 times indicating the Module is now in Valet Mode. The
LED will turn ON solid.
To EXIT Valet Mode
1. With the key in the Ignition switch, turn the key to the ON (RUN/IGNITION) and then OFF
positions 5 times within 10 seconds.
2. The Parking Light will flash twice indicating the Module is now out of Valet Mode.
The LED will turn OFF.
Remote Valet
This feature will put your vehicle into Valet Mode using the remote transmitter instead of
the Valet button as above.
Note: Once the Electronic Valet is activated, the remote starter and Alarm features are
disabled.
To put the system into Valet Mode:
1. Hold down the UNLOCK and START buttons simultaneously for 3 seconds.
2. The Parking Lights will flash 3 times.
3. The siren will chirp twice and the LED will come ON.
To take the system out of Valet Mode:
1. Hold down the UNLOCK and START buttons simultaneously for 3 seconds.
2. The Parking Lights will flash 2 times.
3. The siren will chirp twice, then pause, then chirp twice again, and the LED will go OUT.
“Home Valet”
TM
Mode
This safety feature will remotely place the vehicle into a no-remote-start mode: if the
vehicle is parked indoors there is no danger of the vehicle starting by accident with the
remote control.
Note: Once the Home Valet Mode is activated, the vehicle will not start by remote.
To activate the Home Valet Mode:
1. Press the LOCK or UNLOCK button.
2. Within 3 seconds, press the STOP button until the parking lights go out.
To disable the Home Valet Mode:
1. Turn the ignition key to the IGNITION ON (RUN) position.
The system will warn you if someone attempts to start your vehicle while it stands in
Home Valet Mode. The parking lights will:
2. Go ON then OFF; then:
3. Flash twice, pause; then