Filter
Top Products
7
PASSIVE ARMING
Active arming / disarming is controlling your security system via the remote
transmitter. This security system is equipped with an optional Passive Arming feature,
which allows the security system to arm 30 seconds after the last door is closed.
Operation is as follows.
1. Turn the ignition to the “OFF” position and exit the vehicle.
2. After all entrances are closed, the security system LED will flash fast for 30
seconds. If you reopen any door / hood / trunk, the security system LED will stop
flashing. It will begin flashing again once the vehicle all entrances are closed.
3. After 30-second timer has elapsed, the security system will automatically “ARM”.
The siren will chirp [1] time and the parking lights will flash [1] time.
PASSIVE ARMING WITH PASSIVE DOOR LOCKING:
The vehicle doors will automatically lock after passive arming cycle has been
completed.
PASSIVE ARMING BY-PASS: While the system disarmed, Press the button
twice, the security will respond with [1] chirp and LED will turn “ON”. The security
system will remain in this temporally state for as long as you wish. To exit passive
by-pass, press the transmitter or button and the system will return to normal
status.
ACTIVE DISARMING – UNLOCK & DISARM:
Press button on the transmitter.
The siren will chirp twice and parking light flash twice to indicating that the security
system is now disarmed. The vehicle’s door will unlock and dome light turns on for
30 seconds upon disarming when interfaced with the security system.
System Disarm
Doors Trigger
Trunk/HoodTrgr
Shock SensorTrgr
Ignition Trigger
Clear The Flash Icon:
Press the button 3
times within 3 seconds will
clear the flash icon on the
LCD screen transmitter.
TAMPER DISARMING: If alarm triggered, upon disarm the system, siren chirp 4
times, parking light flash 3 times.
PATHWAY ILLUMINATION: This feature turns the parking light “ON” for 30 seconds
upon a unlock signal and for 10 seconds upon the lock signal.