Auto Page RF-520LCD Automobile Alarm User Manual


 
16
Timer Setting: Example to AM10:30
1. Press & hold the button for 3 seconds, with two-melody sound and the
“Hours” digit flashes for adjusting.
2. Press the or button to decrease or increase the “Hour” digit until AM10: xx
3. Press the button once again then the “Minute” digit flashes for adjusting.
4. Press the or button to decrease or increase the “Minutes” digit until AM
10:30
5. Press the button for 2 seconds with one-melody sound to confirm exit the
timer program mode.
Alert Alarm Timer Setting: Example to PM 6:30
1. Press & hold the button for 3 seconds, with two-melody sound and the
“Hours” digit flashes for adjusting.
2. Press the button twice, the LCD screen will shows icon and “Hours” digit
is flashes for adjusting.
3. Press the or button to decrease or increase the “Hour” digit until PM 6:xx
4. Press the button once again then the “Minutes” digit flashes for adjusting.
5. Press the or button to decrease or increase the “Minutes” digit until PM
6:30
6. Press the button once again then icon flashes for alert alarm “ON / OFF”
setting
7. Press the button to start the “Alert Alarm Timer”, and the “ON” icon will show
on the LCD screen. Press the button to stop the “Alert Alarm Timer”, and the
“OFF” icon will show on the LCD screen.
8. Press button for 2 seconds with one-melody sound to confirm exit the timer
program mode.
Count Down Timer Setting: Example Set count down timer at 2:30
1. Press & hold the button for 3 seconds, with two-melody sound and the
“Hours” digit flashes for adjusting.
2. Press the button 5 times, the LCD screen will shows icon and “Hours”
digit is flashes for adjusting.
3. Press the or button to decrease or increase the “Hour” digit until 2:xx
4. Press the button once again then the “Minutes” digit flashes for adjusting.
5. Press the or button to decrease or increase the “Minute” digit until 2:30
6. Press the button once again then icon flashes for alert alarm “ON /
OFF” setting
7. Press the button to start the count down timer, and the “ON” icon will show on
the LCD screen.
Press the button to stop the count down timer, and the “OFF” icon will show
on the LCD screen.
8. Press the button for 2 seconds with one-melody sound to confirm exit the
timer program mode.
Note: Maximum is 19 hours.