Filter
Top Products
5
LCD DISPLAY TRANSMITTER OPERATION ONLY:
Transmitter Button System Function Remark
- (C)
System’s Trigger Check Press within 3 seconds
- - (C)
System’s Status Check Press within 3 seconds
(1 second) LCD screen lamp turns on
for 5 seconds.
Press and hold for 1 second
- -
Clear the Flash Icon and
Melody Sound on the LCD
Screen Transmitter
Press within 3 seconds
- + (2 sec)
Switching code for 2nd / 1st
Car Operation
Press within 3 seconds
BUTTON LOCK:
It is useful if you want to disable the transmission function of the LCD remote control
to temporarily prevent from any inadvertent pressing of buttons by others.
The 2-way remote control transmitter:
Press the button first, within 3 seconds press and
hold the
(
) button for 2 seconds to activate or cancel
the button lock function.
The
icon will be displayed on the LCD screen to
confirm that the LCD remote transmitter is in the “Button
Lock” mode.
LED display:
LED Function LED Function
Off Disarmed Zone 1 / Warn-Away Trigger
Slow Flash Armed 2 flashes... pause Zone 2 / Trigger on Trunk/Hood
Fast Flash Passive Arming 3 flashes... pause Zone 3 / Trigger on Door Switch
On (Solid) Valet Mode 4 flashes... pause Zone 4 / Trigger on Shock Sensor
5 flashes... pause Zone 5 / Trigger on Ignition Switch
CHIRP INDICATORS: PARKING LIGHT:
Chirp Function Parking light Function
1 chirp Arm 1 flash Arm
2 chirps Disarm 2 flashes Disarm
3 chirps Defective Reminder 3 flashes Disarm / Triggered
4 chirps Disarm / Triggered 12 flashes Car Locator
6 chirps Car Locator