Filter
Top Products
13
Door Open Warning
Doors are illegally opened
(Zone 3)
Trunk/Hood Trigger
Trunk or Hood is illegally
opened (Zone 2)
Shock Sensor Trigger
Trigger on Shock Sensor
(Zone 4)
Warn Away trigger
Trigger on Shock Sensor
(Zone 1)
Time Monitor
Alert Alarm
You have set morning call
alarm
Count Down Timer
Reminder when time is up
for parking
Power Save Mode
Save the battery power
Vibration Mode
Remote Control vibrates
when the system is
triggered
Button Lock
Disable the transmission
function temporarily
Driver paging
Someone is paging you in
front of your vehicle
Low Battery
You have to replace the
battery of remote control.
PROGRAMMING OF THE LCD REMOTE TRANSMITTER:
Transmitter Button Description Operation
(1 second)
LCD screen lamp turns on for
5 seconds.
Press and hold for 1 second
1 melody sound to confirm
enters.
(3 seconds)
Timer Programming Mode. Press and hold for 3 seconds
2-melody sounds to confirm
enter.
(5 seconds)
Power Save Mode Press and hold for 5 seconds
1 melody sound to confirm
enters.
- -
Clear the Flash Icon and Melody
Sound on the LCD Screen
Transmitter
Press within 3 seconds
- (2-second)
Button Lock ( ) enable / disable
Press within 3 seconds
- (2-second) Melody / Vibration ( ) Mode
Press within 3 seconds
- (2-second)
Program Count Down Timer ( )
(10-Minute / 20M / 30 M /1Hour
/1.5H / 2.0H)
Press within 3 seconds
cycling
*leave the buttons starting
count
down then flashes
- (2-second)
Enable / Disable Bi Sound (Bi)
While Pressing Button