Filter
Top Products
5
PASSIVE ARMING BY-PASS—
The RF-505 security system can temporarily by-pass the passive arming
function via the remote transmitter. To temporarily by-pass passive arming,
exit the vehicle and close all doors. The LED will begin to fast flash the 30-
second timer for passive arming. Within the 30-second timing window press
the CAR button on the remote transmitter firmly twice, the security system
will respond with (1) chirp and the LED will turn ON. The security system
will remain in this temporary mode for as long as you wish. To exit passive
arming by-pass, press the LOCK/UNLOCK button and the system will
return to its normal status.
This feature is only available when the Passive Arming feature is
programmed ON in feature programming.
Transmitter Button Actions System Function
Press Lock Doors/Unlock Doors
Once Arm/Disarm System
Press & Hold Panic
3 Seconds Function
Press Twice Arm & Delete
When Arming Optional Sensor
Press Twice Disarm & Unlock
When Disarming 2 Step Door Locks
Press & Hold Channel Two
2 Seconds Trunk Control
Press Twice - Only Passive Arming
During Passive Arming By-Pass
Press Car
Twice Locator
Press Channel Three
Once AUX Control
Press Both Channel Four
Together AUX Control
Press Both SIS-5 Sensor Adjust Mode
Together 3 Seconds See Mode Operation
Press Both Passive/Manual Arming
Together 3 Seconds See Mode Operation
Press Both Together Silent
Ignition in OFF Position Arm /Disarm
2nd Car Operation Side Button
Garage Door Opener Switching Code