Filter
Top Products
4
2
ND
CHANNEL AUXILIARY FUNCTION (OPTIONAL)—
You may use the CAR button on your remote transmitter for a separate
function. For example, if your vehicle is equipped with a factory electronic
trunk release. The security system can be interfaced with the factory switch
and electronically open your trunk by pressing the CAR button for 2 seconds
on the remote transmitter.
3
RD
CHANNEL AUXILIARY FUNCTION (OPTIONAL)—
You may use the AUX button on the remote transmitter for a separate
function. For example, if your vehicle is equipped with power windows or a
sunroof. The security system can be interfaced with an optional window
control module (Autopage AC68). To operate the 3
rd
channel function, press
the AUX button on the remote transmitter.
4
TH
CHANNEL AUXILIARY FUNCTION (OPTIONAL)—
You may use the 4
th
channel button on the remote transmitter to operate a
separate function. For example, if your wish to add a remote start to your
vehicle controlled by the security system. The security system can be
interfaced with an optional remote start module (Autopage RST2050KE). To
operate the 4
th
channel function, press the AUX & CAR buttons together on
the remote transmitter.
SENSOR BY-PASS—
The RF-505 can by-pass the SIS-5P shock sensor and the 2
nd
sensor port
from the transmitter. When arming the alarm with the “Lock/Unlock”
button, within 3 seconds press the “Lock/Unlock” button again. The siren
will give a long chirp confirming the shock sensors are turned off. The
sensors will reset the next time the alarm is armed.
PRIOITY DOOR UNLOCK (OPTIONAL)—
Your RF-505 security system is equipped with a priority door unlock feature
which will independently unlock the drivers door first when disarming the
security system. Pressing the LOCK/UNLOCK button a second time within
3 seconds of disarming will unlock the rest of the vehicle.
This feature requires additional installation and is not a standard feature of
the security system.