Filter
Top Products
3
RF-505 OPERATION INSTRUCTIONS
Remote Transmitter Operation—
Your Autopage Security comes with two 5-button Remote Control
Transmitters. The transmitters feature a sophisticated code hopping system
that will prevent illegal use of a code-grabbing device that may be used to
record and steal your transmitter codes.
ARM & LOCK—
To arm your security system, press the LOCK/UNLOCK button once. The
siren will chirp (1) time and the vehicle parking lights will flash (1) time
indicating that the security system is now armed. The vehicles doors will
lock upon arming when interfaced with the security system.
DISARM & UNLOCK—
To disarm your security system, press the LOCK/UNLOCK button once.
The siren will chirp (2) times and the vehicle parking lights flash (2) times
indicating that the security system is now disarmed. The vehicles door locks
will unlock upon disarming when interfaced with the security system.
DELETING THE ARM/DISARM CHIRP—
When attempting to arm or disarm your security system, you have the option
of temporarily muting the siren chirp sound. To perform this function,
simply press both the LOCK/UNLOCK & CAR buttons together on the
remote transmitter. No sound will be heard, arm / disarm confirmation will
be visual via the vehicle’s parking lights only.
CAR LOCATOR—
Your Autopage Vehicle Security System is equipped with a vehicle locator
function which chirps the siren (6) times and flashes the vehicles parking
lights (12) times to easily locate your vehicle. To access this function,
simply press the CAR button firmly twice on the remote transmitter.
REMOTE PANIC FUNCTION—
The remote transmitter may be used as a remote panic switch that will
activate the security system’s siren and vehicle parking lights in case of an
emergency. To activate the panic function, press and hold the
LOCK/UNLOCK button for 3 seconds. To cancel the panic function, press
the LOCK/UNLOCK button on the remote transmitter.