Filter
Top Products
EXP
-
52
5
(siren will sound); switch the vehicle ignition to ON. Move the
VALET/OVERRIDE switch to ON; then OFF; the siren will stop. The EXP-
52 will be disarmed. Quickly replace or service the remote transmitter to
insure continued vehicle protection.
2. VALET FUNCTION
The EXP-52 may be placed into the VALET (stand-by) mode to allow for
vehicle service, car washing, or attendant parking without self arming
after the ignition is switched off, and without leaving the EXP-52 remote
control with unauthorized individuals.
To operate the VALET FUNCTION turn the vehicle ignition to ON and
move the VALET/OVERRIDE SWITCH to ON.
To return to normal operation turn the vehicle ignition to ON and move
the VALET/OVERRIDE SWITCH to OFF.
3. KEYLESS ENTRY MODE
In the valet mode, the vehicle doors can be locked and unlocked using
the remote. However, there will be no chirp confirmation; it is strongly
recommended that the driver visually confirm that the doors are locked.
F. PASSIVE/MANUAL ARMING OPERATION
(Optional at installation)
Passive/Manual operations can be selectable if an optional toggle
switch is installed. Consult your installing dealer.
1. PASSIVE ARMING
If you choose the PASSIVE (automatic) mode, the system must be
operated as below.
1. Switch OFF vehicle ignition, exit vehicle, and be sure all protected
openings are closed.