Filter
Top Products
EXP
-
52
1
EXP-52 OPERATION INSTRUCTIONS
A. REMOTE CONTROL TRANSMITTER OPERATION
The new remote control transmitter (XT-54) included with the EXP-52
offers the code rolling feature which will prevent illegal use of a code-
grabber with an attempt to record the code of your transmitter.
1. ARM/DISARM
TO ARM THE EXP-52
Press the ON/OFF button once to
arm. The siren will chirp one (1)
time, the lights will flash, and all
doors will lock. (*)
TO DISARM THE EXP-52
Press the ON/OFF button once to
disarm. The siren will chirp two (2) times, the lights will flash, and all
doors will unlock.(*)
NOTE(*): Your vehicle must be equipped with power door locks and
optional relays may be required. Additionally, all doors will lock
automatically each time the ignition key is turned on, and unlock each
time the ignition key is turned off. Please see Section (H).
2. TEMPORARY CHIRP DELETE FROM REMOTE
Upon approaching the vehicle (whether armed or disarmed) push the
AUX button on the remote control transmitter for half (0.5) second, then
very quickly push the ON/OFF button on the transmitter to arm or disarm
in the usual manner. The chirp sound will be silenced only for this
particular operation. The sequence must be repeated each time if it is
desired to cancel the arm/disarm chirp sound.
AUXON/OFF