Filter
Top Products
128-8604
6 of 8
Page 6
starting device. A running engine produces dangerous carbon monoxide fumes which can be
harmful or fatal if prolonged exposure occurs. DO NOT remote start the vehicle if the car is
garaged.
To Remote Start The Vehicle:
Press and release the button of your Remote Start transmitter two times in
succession to activate the remote start system. The vehicle will start
and remain running for the pre-programmed 5, 10, 15, 20, 45, or 60
minutes. As a visual indication, the parking lights will flash or turn on as pre-
selected by your installation center at time of installation. You may also start
the vehicle with the factory transmitter by pressing lock, unlock, lock in
succession.
When you arrive at your car, unlock the vehicle by pressing and releasing
the unlock button of your factory keychain transmitter, or pressing and
holding for 3 seconds the start button of the single button start transmitter
supplied with this kit. Enter the vehicle and turn the ignition key to the on but
NOT START position.
NOTE: The system may have been configured to allow start by pressing the
transmitter start button once instead of twice. Please consult your installa-
tion center as to the configuration of your partictular system.
CAUTION! Do not turn the key to the start position. This will cause the starter
motor to engage with the already running engine which could result in damage.
Step on the brake pedal to disengage the remote start unit. The vehicle will
continue to run on it's own power.
NOTE: The engine will stop running before the expiration of the pre-programmed run timer if
you complete any of the following:
1. Pressing the button of your Remote Start transmitter two times in succession while running
under control of the remote start system will turn the vehicle off.
2. Depress the vehicles brake pedal.
3. Opening of the the hood.
4. Racing the RPM of the engine to above 4000.
NOTE: If the vehicle is running under control of the remote start unit, and the
transmitter button is operated a second two times in succession, the
vehicle will immediately turn off.
Also note, if this option is installed, as you approach the vehicle while running under control of
the remote start unit, the single button transmitter can be used to unlock the doors, simply
press and hold the unlock button until the doors unlock.
OPERATING ON AUTOMATIC START UP TIMER MODE
The system has the ability to automatically start the vehicle every 2 or 4 hours over a 48 hour
period. This feature is especially useful in cold climates where the only means to keep the
engine and engine fluids warm is to periodically start the engine.
CAUTION! Be certain that the vehicle is outdoors before using this or any remote vehicle
starting device. A running engine produces dangerous carbon monoxide fumes which
can be harmful or fatal if prolonged exposure occurs.
DO NOT remote start the vehicle if the car is garaged.
TO BEGIN THE AUTOMATIC START UP TIMER
1. Turn the ignition key on then off.
2. Within 10 seconds, activate the RF start command two times by pressing the
button of the keychain transmitter four times in succession.
The parking lights will flash 4 times indicating the timed start mode is activated.
The vehicle, on a 2 or 4 hour interval basis, will automatically start, run for the pre-
programmed time (5,10, 15, or 20 minutes), and then shut off. This will continue for 48 hours.
NOTE: The automatic start up timer can also be initiated from the keychain
transmitter.
To do this:
1. Start the vehicle using the keychain transmitter by pressing and releasing the
remote start transmitter button two times in succession. (The vehicle will start)