Filter
Top Products
128-7409
3 of 8
3
System is also packaged with a two way confirming transmitter shown on the previous
page which can be set for Icon mode or text mode to indicate the function and status of
your vehicle.
To change modes, press and hold the "F" button for 5 seconds. This puts the transmit-
ter into the program mode. The program modes lets you select by pressing the Trunk/Key
Icon button to scroll up, or the Option button to scroll down. Once you come to the
selection of choice, press the "F" button to select the option, and then use the Trunk/Key,
or Option button or lock/unlock buttons to toggle between choices. Certain selectable
functions are model specific in other words, trigger history will not be applicable for non
alarm models, etc...
To change between text or icon modes, do the following:
1) Press the "F" button for 5 seconds until the transmitter beeps.
2) Press the Trunk/Key button until Homepage Select Set appears.
3) Press "F" to display the selections of text or icons.
4) Use the Trunk/Key or Option buttons to toggle between text or icon modes.
5) Use the "F" key to select.
6) Press the "F" button for 5 seconds to exit the program mode.
Other features that are selectable or programmable on your two way transmitter are:
(a) Set to defaults. This returns the transmitter to the factory settings if select yes.
(b) Alarm Trigger History (Will display the last 4 trigger events)
(c) You can assign a Name for an output channel function
(d) You can personalize the Homepage to display name, or have the digital clock
displayed
(e) You can select Icon Mode or Text mode
(f) You can select Language of text from English, Spanish or French
(g) Set the temperature readout to display in "Fahrenheit or Celsius
(Only available on certain remote start units)
(h) Set the melody for the Alarm Clock
(i) You can set the unit to provide a Tone, or Vibrate upon activation
(j) You can set the Countdown Timer
(k) You can set the Alarm Clock
(l) You can set the Clock
The icons will be explained in the following pages. If text mode is selected, the text on the
transmitter screen will indicate the function and status.
The top left icon shown indicates:
The Lock Icon Indicates:
When the lock button on the transmitter is pressed and the command is
received and acted upon by the unit in the vehicle, this lock icon will appear
and the transmitter will beep once. If text mode is selected the screen will
read, "Locked/Armed"
The Unlock Icon Indicates:
When the unlock button on the transmitter is pressed and the command is
received and acted upon by the unit in the vehicle, the unlock icon will appear
and transmitter will beep twice. If the text mode is selected, the screen will
read "Unlocked / Disarmed".