Filter
Top Products
Page 6
OWNER’S GUIDE
REMOTE VEHICLE STARTER
The auxiliary output channels are optional. These outputs can be used to
control such things as power sliding doors on Mini Vans or window roll-up/
roll-down on other vehicles.
Activating Auxiliary Channel 5 (Button #5)
1. Press and hold button #5, the park lights will flash and the siren will chip
two times.
2. Continue holding Button #5 until the output activates.
Note: If the ignition key is in the “ON” position, this output will not activate.
The auxiliary output channels are optional. These outputs can be used to
control such things as power sliding doors on Mini Vans or window roll-up/
roll-down on other vehicles.
Activating Auxiliary Channel 6 (Button #6)
1. Press and hold button #6, the park lights will flash and the siren will chip
two times.
2. Continue holding Button #6 until the output activates.
Note: If the ignition key is in the “ON” position, this output will not activate.
Auxiliary 5 Output- 26xx Series Only
Auxiliary 6 Output- 26xx Series Only
Constant Lock Output
The Constant Lock Output is optional. This output can be used to
activate such features as window roll-up or closing a power sunroof.
To activate the Constant Lock Output
1. Press and release the lock button on the remote transmitter then
press and hold the lock button.
2. The lock output will stay active for up to 5 seconds while the
button is being held