Ultra Start 25XX Series Remote Starter User Manual


 
2nd Car Operation
Lock Doors
Unlock Doors
Remote Starting
Remote Stop
1. Press and release the and buttons at the same time.
2. The park lights will flash and the siren
will chirp once.
# LOCK
doors will lock (optional), the
3. The LEDs on the antenna will start flashing within five seconds.
Note: If installed the starter disable will activate.
1. Press and release the and UNLOCK buttons at the same time.
2. The doors will unlock (optional), the park lights will flash and the siren
will chirp two times.
3. The LEDs on the antenna will stop flashing
Note: If installed the starter disable will deactivate.
#
1.Press and release the # and buttons.
2.The park lights will flash and the siren will chirp once.
3.The vehicle will then remote start. The park lights will flash four times then
remain on while the vehicle is running.
4. The vehicle will continue to run for the programmed runtime.*
* (default 15 minutes)
1.Press and hold the # and buttons for three seconds.
2.The park lights will flash and the siren will chirp two times, the
Remote starter will then shut off.
Page 11
This feature will allow the operation of two Ultra Start remote car starters with one remote
transmitter. This feature requires special programming from the dealer. To control 2nd car
functions, press the # button at the same time as the command for the second vehicle.
Example - Press and release the LOCK button. The 1st vehicle will lock the doors
(optional). Press and release (at the same time) the # and LOCK buttons. The 2nd vehicle
will lock the doors(optional).
REMOTE VEHICLE STARTER
OWNER ’S GUIDE