Alpine SEC-100S Automobile Alarm User Manual


 
English
32
If movement is NOT detected during the 30
second reduced state in Step 3A, the radar
sensor expands back to the outer sector.
(The LED blinks once per second.)
A. If movement is detected within 5
seconds after expanding, the radar
sensor repeats the warning indicators of
step 3A. However, if the system has
repeated the warning indicators of Step
3A three times, the radar sensor will
reduce its sensitivity again and wait for
15 minutes. This is to stop the warning
indicators should the automobile be
subjected to an unwanted trigger such
as a rain shower or snowstorm. (The
LED will blink at a slow rate.)
If movement is detected inside the
vehicle during the 15 minute time period,
the system will immediately enter an
alarming state (siren & light flashes).
B. If movement is not detected within 5
seconds after expanding, the system
returns to Step 1.
4
Extension LED
(Blinks once per
second)
Témoin d'extension
(Clignote une fois
par seconde)
Indicador de
extensión
(Parpadea una
vez por
segundo)
Extension LED
(Blinks slowly)
Témoin d'extension
(Clignote lentement)
Indicador de
extensión
(Parpadea
lentamente)
Radar Sensor (SEC-150R) &
Impact Sensor Operation