Filter
Top Products
116 Chapter 3
4. Tighten the captive screw on the keyboard plate.
Replacing the Keyboard
Replacing the Switch Cover
1. Replace keyboard cable to the mainboard, and
secure the locking latch.
2. Turn the keyboard over and place the front edge
first in the mounting.
1. Insert one side of the Switch Cover into the
chassis.
2. While holding the inserted side in place, grasp the
Switch Cover in the middle and bend slightly to
allow for the other side to be inserted.
3. Secure the Switch Cover in place by pressing on all sides until the Switch Cover clicks in place.
New Image needed