93
5. SETUP MENU
The SETUP menu is used to set instrument parameters for performing configuration,
calibration, reporting and diagnostics operations according to user needs.
5.1. SETUP CFG: CONFIGURATION INFORMATION
Pressing the CFG button displays the instrument’s configuration information. This
display lists the analyzer model, serial number, firmware revision, software library
revision, CPU type and other information. Use this information to identify the
software and hardware when contacting customer service. Special instrument or
software features or installed options may also be listed here.
To access the configuration table, press:
SETUP X.X PRIMARY SETUP MENU
CFG DAS RNGE PASS CLK MORE EXIT
SETUP X.X T400
PREV NEXT EXIT
Press exit at
any time to
return to the
SETUP menu
Press NEXT or PREV to move back and
forth through the following list of
Configuration information:
MODEL TYPE AND NUMBER
PART NUMBER
SERIAL NUMBER
SOFTWARE REVISION
LIBRARY REVISION
CPU TYPE & OS REVISION
SUPPORT info
SAMPLE RANGE=500.0 PPB O3= XXXX
<TST TST> CAL SETUP
