Teledyne API - T100 UV Fluorescence SO2 Analyzer Overview of Operating Modes
85
4.1. SAMPLE MODE
This is the analyzer’s standard operating mode. In this mode, the instrument is a
calculating O
3
concentrations.
The T400 analyzer is a computer-controlled analyzer with a dynamic menu interface for
easy and yet powerful and flexible operation. All major operations are controlled from
the front panel display and touchscreen through these user-friendly menus.
To assist in navigating the system’s software, a series of menu trees can be found in
Appendix A of this manual.
Note The flowcharts in this Section depict typical representations of the front
panel display/touchscreen interface during the various operations being
described. They are not intended to be exact and may differ slightly from
the actual display of your system.
Note The ENTR button may disappear if you select a setting that is invalid or
out of the allowable range for that parameter, such as trying to set the 24-
hour clock to 25:00:00. Once you adjust the setting to an allowable
value, the ENTR button will re-appear.
This section covers the software features of the T400 analyzer that are designed as a
computer controlled
