Connecting a Printer
The TS690R supports two type of printers, the CPA6
printer (no longer available) and any standard
RS232 printer. When using an RS232 printer a
DCI/MPA printer adapter will be required. Menvier
Security supply a DATAC printer kit which consists of
a portable RS232 printer, charger unit and
DCI/MPA adapter.
Using the CPA6 Printer
1. Plug the CPA6 printer directly on to the PRINTER
plug (JP1) on the main control panel PCB.
2. The printer will printout a header, when finished
the system event log can be printed.
3. When finished unplug the printer.
Using the DATAC / RS232 Printer
1. Plug the DCI/MPA on to the PRINTER plug (JP1)
on the main control panel PCB.
2. Plug the other end of the DCI/MPA into the
DATAC or RS232 printer.
3. In order for the printer to work correctly ensure
the printer is set to the following:
Baud rate = 4800
Parity = None
Stop bits = 2
Data bits = 8
DTR = Normal
4. When set-up correctly the system event log can
be printed.
5. When finished unplug the MPA/DCI.
Programmable Outputs
The TS690R has many programmable outputs
which can be used to drive relays, LED’s etc. Each
output can be programmed for a different
function, see "Programmable Output Types" on
page 24.
Control Panel Outputs
The control panel has three programmable
outputs:
[1-] Switched -ve output rated at 100mA.
[2-] Switched -ve output rated at 100mA.
[3-] Switched -ve output rated at 100mA.
Remote Keypads & TS700.LECs
Each remote keypad and TS700 LEC has one
programmable output:
[O/P] Switched -ve output rated at 100mA.
19
TS690R Installation Manual System Installation
MPA
or DCI
DATAC or RS232 printer
CPA6 Printer
RS232 Data
Connect to JP1
PRINTER
Connect to JP1
PRINTER
1
CPA6 P
DATA IN
POWER
PAPER FEED
Figure 13. Printer Connections
Relay
Relay available from
RS components
P/No. 346-946.
Capable of switching
mains voltages
Aux 12 V
-ve O/P
(Programmed as Alarm / Bell / etc)
12V Buzzer
RS Part No. 245-051
1K0 Ohm Resistor
LED (Light Emiting Diode)
-Ve O/P
-Ve O/P
Aux 12V
Aux 12V
Diode (IN418)
Figure 14. Output Examples
