92
US
6 Press V/v repeatedly to select
the setting you want, then
press .
• RF AUTO: Normally select this. The
system changes “RF CHANGE” to “RF
ON” or “RF OFF” automatically.
• RF ON: The system transmits sound by
searching the better channel for
transmitting.
• RF OFF: The system transmits sound by
fixing the channel for transmitting.
To exit the menu
Press MENU/HOME or AMP MENU
Notes
• When the wireless transmitter is not inserted in the
S-AIR main unit, you cannot set “RF CHANGE”.
• In most cases, you will not need to change this
setting.
• If “RF CHANGE” is set to “RF OFF,”
transmission between the S-AIR main unit and
S-AIR sub unit can be performed using one of the
following channels.
– S-AIR ID A: equivalent channel for IEEE
802.11b/g channel 1
– S-AIR ID B: equivalent channel for IEEE
802.11b/g channel 6
– S-AIR ID C: equivalent channel for IEEE
802.11b/g channel 11
• The transmission may be improved by changing
the transmission channel (frequency) of the other
wireless system(s). For details, refer to the
operating instructions of the other wireless
system(s).
Enjoying the S-AIR
receiver while the S-AIR
main unit is in standby
mode
(For the S-AIR receiver only (not
supplied))
You can enjoy the S-AIR receiver while the
S-AIR main unit is in standby mode by setting
“S-AIR STBY” to “STBY ON”.
1 Press AMP MENU.
2 Press V/v repeatedly to select
“S-AIR”.
3 Press or b to enter the
menu.
4 Press V/v repeatedly to select
“S-AIR STBY”.
5 Press or b to enter the
parameter.
1 2 3
4 5 6
7 8 9
-/-- 0/10
ENT/MEM
2CH/
A.DIRECT
A.F.D. MOVIE MUSIC
CLEAR
/
>10
SHIFT
AUTO CAL
VIDEO 1 VIDEO 2 BD
SAT TV
HDMI3HDMI2HDMI1
HDMI4
SA-CD/
CD
DMPORTTUNER
MENU
RETURN/
EXIT
TOOLS/
OPTIONS
HOME
DISPLAY
AMP
MENU
O
DVD
INPUT
MODE
SLEEP
NIGHT
MODE
TV AMP
AMP
MENU
,
V/v/B/b
Input
buttons
MENU/
HOME
