49
US
Amplifier Operations
a)
For details, see the page in the parentheses.
b)
xxx represent a speaker channel (FL, FR, CNT, SL, SR, SB, SBL, SBR, SW).
c)
Depends on the speaker pattern setting, some parameters may not be available.
d)
You can only select this parameter if “SP PATTERN” is not set to a setting with surround back speakers (page
51).
e)
You cannot select this setting if your speaker is set to “LARGE”.
f)
Depends on the speaker pattern setting, some settings may not be available.
g)
This parameter is only available if the SiriusConnect Home tuner is connected to the SIRIUS jack on the
receiver.
h)
This parameter is only available when HDMI input signals is detected.
i)
This parameter is only available if the S-AIR transmitter (not supplied) is inserted to the EZW-T100 slot on
the receiver.
Menu
[Display]
Parameters
[Display]
Settings Initial
setting
HDMI
[HDMI]
(page 58)
Control for HDMI
a)
[CTRL:HDMI]
CTRL ON, CTRL OFF CTRL OFF
Setting HDMI audio input
a)
[AUDIO OUT]
AMP, TV+AMP AMP
Subwoofer level for HDMI
a)h)
[SW LEVEL]
SW AUTO, SW 0 dB, SW +10 dB SW AUTO
SYSTEM
[SYSTEM]
(page 59)
Naming inputs
[NAME IN]
For details, see “Naming inputs”
(page 42).
Brightness of the display
a)
[DIMMER]
70% DOWN, 40% DOWN,
0% DOWN
0% DOWN
S-AIR
[S-AIR]
(page 59)
S-AIR ID
a)i)
[S-AIR ID]
ID: A, ID: B, ID: C ID: A
Pairing
a)i)
[PAIRING]
START, CONDITION START
S-AIR mode
a)i)
[S-AIR MODE]
PARTY, SEPARATE PARTY
RF Change
a)i)
[RF CHANGE]
RF AUTO, RF ON, RF OFF RF AUTO
S-AIR Standby
a)i)
[S-AIR STBY]
STBY ON, STBY OFF STBY OFF
