27
US
Getting Started
The following illustration shows how to
connect a DVD player.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
Notes
• The initial setting of the COMPONENT VIDEO
IN 2 jacks are DVD player. If you want to connect
your DVD player to the COMPONENT VIDEO IN
1 or IN 3 jacks, set “V. ASSIGN” in the VIDEO
menu (page 57).
•When connecting optical digital cords, insert the
plugs straight in until they click into place.
•Do not bend or tie optical digital cords.
• To input multi channel digital audio from the DVD
player, set the digital audio output setting on the
DVD player. Refer to the operating instructions
supplied with the DVD player.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
* When you connect a component equipped with an
OPTICAL jack, set “A. ASSIGN” in the AUDIO
menu (page 57).
Connecting a DVD player
L
R
DC5V
0.7A MAX
HDMIANTENNA
DMPORT
IN 4
ASSIGNABLE (INPUT ONLY)
IN 2
IN 3
IN 1 OUT
AM
OUT
IN
SA-CD/CD/CD-R
VIDEO 1
IN
TV
AUDIO
IN
VIDEO
IN
SAT
AUDIO
OUT
AUDIO
OUT
VIDEO
OUT
VIDEO
OUT
IN
OPTICAL
AUDIO
IN
VIDEO
IN
SUBWOOFER
MONITOR
AUDIO
IN
VIDEO
IN
BD
LRLR
SPEAKERS
CENTER
FRONT A
SURROUND BACK/
BI-AMP/
FRONT B
TV
SIRIUS
EZW-T100
LR
SURROUND
SAT
IN
BD
IN
OPTICAL
COAXIAL
IN 3
Y
P
B
/
C
B
COMPONENT VIDEO
P
R
/
C
R
ASSIGNABLE (INPUT ONLY)
IN 2
IN 1
MONITOR
OUT
DVD
IN
DIGITAL
(ASSIGNABLE)
DVD player
A
A Component video cord (not supplied)
B Optical digital cord (not supplied)
C Coaxial digital cord (not supplied)
Video signals Audio signals
CB
