Using MediaScript 21
•
•
•
•
The following table lists the properties you can configure for either FTP or HTTP:
Property Usage
Disabled Set to 1 to disable the file system, 0 or no entry to enable it
Specifier This is the path specifier that denotes this file system.
UserName Sets the default user name.
Password Sets the default password.
UserNameAndPassword Sets the default username and password (separated by “:”).
FTP Set to 1 to use FTP protocol, 0 or no entry to use HTTP.
ProxyHost Set as proxyServerNameOrIP[:port] to configure a HTTP proxy
server (HTTP only).
ResponseTimeout Specifies the amount of time to wait for a response from a server
before giving up.
LockTryDelay Specifies the amount of time to wait (in seconds) when a cache file
is locked.
MaxTries Specifies how many times to retry a locked cache file before giving
up.
BreakLockOnFailure Set to 1 break a lock on a cache file, if the lock fails to become
available.
RefreshInterval Specifies how often (in seconds) to check the web for a newer
image.
