Unit 4: LCD Display
SATO MB2i Service Manual PN 9001145B Page 4-6
PRINTER ERRORS
STATUS LCD DETAIL
Low Battery Displays location of error. The battery icon will
display a low charge condition and blink.
The electric field strength icon will only be
displayed if Wireless LAN is set as the interface
type.
Module Error Displays location of error. This will indicate an
error was detected in the Wireless LAN or
Bluetooth interface as applicable.
The electric field strength icon will only be
displayed if Wireless LAN is set as the interface
type.
Head Error Displays location of error. This will indicate an
error was detected with the print head.
The electric field strength icon will only be
displayed if Wireless LAN is set as the interface
type.
Cover Open Displays location of error. This will indicate the top
housing cover is not latched.
The electric field strength icon will only be
displayed if Wireless LAN is set as the interface
type.
Paper End Displays location of error. This will indicate that
the paper supply is exhausted. Reload.
The electric field strength icon will only be
displayed if Wireless LAN is set as the interface
type.
Sensor Error Displays location of error. This will indicate an
error was detected with a sensor. Troubleshoot.
The electric field strength icon will only be
displayed if Wireless LAN is set as the interface
type.
Buffer Near Full Displays location of error. This will indicate the
receive buffer is at capacity.
The electric field strength icon will only be
displayed if Wireless LAN is set as the interface
type.
Head Protect Displays location of error. This will indicate the
status of the head protect feature.
The electric field strength icon will only be
displayed if Wireless LAN is set as the interface
type.
BATTERY
ERROR
MODULE
ERROR
HEAD
ERROR
COVER
OPEN
PAPER
END
SENSOR
ERROR
NEAR
FULL
HEAD
PROTECT
