English
OPERATION 37
Time/Date Automatic
The automatic Time/Date feature allows you to select a
channel from which the date and time are obtained (e.g.
because the currently selected channel is unreliable or
inaccurate). If you don’t know the correct channel for
the BPS station that can send Time and Date information
in your area, see ‘Time/Date Manually.’
1 In the Installation menu, select ‘
Time
/
Date
’ with the
w (down cursor) or v (up cursor) button, then
press the u (right cursor) button.
‰ The Automatic/Manual screen is displayed, with
the cursor on the currently selected option.
2 Press the w/v (down or up cursor) to select
‘
Automatic
.’
Note:
Usually, the PBS station in your area broadcasts the time and
date. You may want to try the PBS channel number as your
first choice.
3 Press OK to confirm.
‰ The Time/Date Automatic screen is displayed.
4 Select the field you want to change with the w/v
(down or up cursor) button.
5 Enter the correct digits or press t/u (left or right
cursor) to enter a channel number.
‰ Press t/u (left or right cursor) to toggle between
the values for
Daylight Saving
and
Time zone
.
Select the right time zone if the DVD Recorder is
tuned to the PBS channel of a different time zone to
ensure the correct clock setting.
6 Confirm each entry with OK.
7 To end, press SYSTEM MENU repeatedly to
remove the menus.
‰ The time and date will be set by the specified
channel the next time you switch to Standby power
mode.
‰ The DVD Recorder downloads from the
specified channel. if possible. If the specified channel
does not carry date and time information, the
message appears ’
No time and date available
.’ The
Automatic Time and Date screen will reappear
automatically. You can repeat the procedure with a
new channel number.
- manually
If the time in the DVD Recorder display is not correct,
the clock must be set manually.
1 In the installation menu, select Time/Date with the
w/v (down or up cursor) button, then press u
(right cursor).
‰ The Automatic/Manual screen is displayed, with
the cursor on the currently selected option.
2 Press the w (down cursor) to select ’
Manual
.’
3 Press OK.
‰ The Time/Date screen appears.
4 Adjust ’
Time
,’ ’
AM/PM
,’ ’
Year
,’ ’
Month
,’ ’
Date
,’ and
’
Daylight saving
’ if required. Select the w/v (down
or up cursor) button. Change values with the t/u
(left or right cursor) button or the 0-9 digit keys.
5 When the information is all correct, press OK.
6 Press SYSTEM MENU repeatedly to remove all
menus.
