24
Connect power
Caution
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
of the unit.
Before connecting the AC power cord, ensure you have
completed all other connections.
Note
The type plate is located on the bottom of the product.
1 Connect the AC power cable:
to this product.
to the wall outlet.
4 Get started
Prepare the remote control
1 Open the battery compartment.
2 Insert 2 AAA batteries with correct polarity
(+/-) as indicated.
3 Close the battery compartment.
Caution
Remove batteries if they are exhausted or if the remote
control is not to be used for a long time.
Do not mix batteries (old and new or carbon and
alkaline, etc.).
Batteries contain chemical substances, so they should be
disposed of properly.
Find the correct viewing channel
1 Press to turn on this product.
2 Turn on the TV and switch to the correct
video-in channel. (Refer to the TV user manual
on how to select the correct channel.)
&RQQHFWWRGLJLWDODPSOLÀHUUHFHLYHU
1 Connect a coaxial cable (not supplied) to:
the COAXIAL jack on this product.
the COAXIAL/DIGITAL input jack on
the device.
Connect analogue stereo system
1 Connect the supplied AV cables to:
the AV OUT jack (3.5mm) on this
product.
the audio input jacks on the device.
&RQQHFW86%ÁDVKGULYH
1 &RQQHFWD86%ÁDVKGULYHWRWKH jack on
this product.
Note
This product can only play/view MP3, WMA, DivX or
-3(*ÀOHVWKDWDUHVWRUHGRQD86%ÁDVKGULYH
Press the
button to access the content and play
WKHÀOHV
DIGITA L IN
AUDIO IN
EN
