23
Option 3: Connect to the AV OUT jack
1
Connect the supplied AV cables to:
the AV OUT jack (3.5mm) on this
product.
the video input jack on the TV.
Tip
The video input jack on the TV may be labeled as A/V
IN, VIDEO IN, COMPOSITE or BASEBAND.
This type of connection provides standard picture
quality.
Connect audio cables
Connect the audio from this product to the TV to
allow sound output through the TV.
1 Connect the supplied AV cables to:
the AV OUT jack (3.5mm) on this
product.
the audio input jacks on the TV.
Route audio to other devices
Route the audio from this product to other devices
to enhance audio play.
VIDEO IN
AUDIO IN
Option 1: Connect to the HDMI jack
1 Connect an HDMI cable (not supplied) to
the HDMI OUT jack on this product.
the HDMI input jack on the TV.
Note
If the device supports HDMI CEC, you can control
compliant devices with a single remote control (see “Get
started” > “Use Philips EasyLink”).
Tip
This type of connection provides best picture quality.
Option 2: Connect to the component
video jack
1 Connect the component video cables (not
supplied) to:
the Y Pb Pr jacks on this product.
the COMPONENT VIDEO input jacks
on the TV.
Tip
The component video input jack on the TV might be
labeled as Y Pb/Cb Pr/Cr or YUV.
This type of connection provides good picture quality.
HDMI IN
Pb
COMPONENT
VIDEO IN
Y
Pr
English
EN
