
The rear sun shade operates when the ignition
switch is in the ACC or ON position.
The rear sun shade switch is located on the front
console.
● To raise the sun shade, push the upper side
of the switch
᭺
1
.
● To lower the sun shade, push the lower side
of the switch
᭺
2
.
● The switch need not be held down.
CAUTION
● Do not place objects (such as newspa-
pers, handkerchiefs, etc.) on the screen
inlet port. Doing so may entangle these
objects in the screen when it is extend-
ing or retracting, causing improper op-
eration or damage to the screen.
● Do not push the sun shade arm with
your hands, etc., as this may deform it.
Improper operation or damage to the
screen may result.
● Do not hang any object on the arm rail
as this mayresult in improper operation
or damage the screen.
● Do not forcefully pull the screen. Doing
so may elongate the screen. Improper
operation or damage to the screen may
result.
● To avoid personal injury, keep your
hands, fingers and head away from the
sun shade arm, armrail and screen inlet
port.
● Do not allow children near the rear sun
shade system. They could be injured.
● Do not pull or push the rear sun shade.
This could cause improper operation or
damage it.
The interior light has a three-position switch and
operates regardless of ignition switch position.
● When the switch is in the ON position
᭺
1
,
the front and rear personal lights will illumi-
nate, regardless of door position. The light
will go off after 15 minutes unless the igni-
tion switch is placed in the ON position.
● When the switch is in the center DOOR
position
᭺
2
, the front and rear personal
lights will illuminate under the followingcon-
ditions:
– Driver’s door is unlocked while the igni-
tion switch is placed in the OFF position.
WIC1443 WIC1550
REAR POWER SUN SHADE (if so
equipped)
INTERIOR LIGHT
Instruments and controls 2-49