Chapter 10. ACLs | 141
ProSafe M4100 and M7100 Managed Switches
a. After you click the Add button in step 3, a screen similar to the following displays.
b. Under Extended ACL Rule Configuration, enter the following information:
• In the Rule ID (1 to 23) field, enter 22.
• For Action, select the Permit radio button.
• In the Protocol T
ype list, select UDP.
• In the Source IP
Address field, enter 192.168.77.0.
• In the Source IP Mask field, enter 0.0.0.255.
• In the Destination IP
Address field, enter 192.178.77.0.
• In the Destination IP Mask field, enter 0.0.0.255.
c. Click Apply to save the settings.
5. Apply ACL
101 to port 2.
a. Select Security >
ACL > IP ACL > IP Binding Configuration.
A screen similar to the following displays.
b. Under IP Binding Configuration, enter the following information:
