18
Chapter 2 Settings and Adjustments
2-4 Adjusting Sharpness [Sharpness]
This function allows you to emphasize the outline of the image by emphasizing
the color difference between the pixels composing the image and to improve a
sense of quality and materiality. Contrarily, this function allows you to show the
image smoothly by blurring the outline of the image.
Adjustablerange:-3to3
(1) Press .
The adjustment menu appears.
(2) Select (Screen).
(3) Adjust the sharpness with or of (Sharpness).
(4) Select .
The adjustment is completed.
2-5 Setting Enable/Disable for the automatic
brightness adjustment function
[Bright Reg]
The sensor on the front side of the monitor detects the environmental brightness
to adjust the screen brightness automatically and comfortably by using the
BrightRegulator function.
(1) Press .
The adjustment menu appears.
(2) Select (PowerSave).
(3) The Enable/Disable setting is toggled by selecting (Bright Reg).
Enable
Disable
(4) Select .
The mode selected is set.
2-6 Turning off the monitor automatically
[Off Timer]
Thisfunctionallowsthemonitortoautomaticallyturnoffafteraspeciedtime
has passed. This function serves to protect the monitor from after-images
caused when the same image is left displayed for a long time. Use this function
when an image is displayed throughout the day.
Adjustablerange:Off,1to23h
(1) Press
.
The adjustment menu appears.
(2) Select (PowerSave).
(3) Set a monitor OFF time with or of (Off Timer).
Select “Off” to set Off timer setting to “Off”.
(4) Select
The Off timer setting is completed.
(5) “Power will shut off in a minute” appears on the display if it becomes one
minute before the setting time.
If you select (Extend), the off timer function works 90 minutes later.
Note
• You can turn on or off the monitor
at the setting time by using the
“ScreenManager Pro for LCD”. You
can specify up to 8 timer settings.
Note
• You can turn on or off the monitor
at the setting time by using the
“ScreenManager Pro for LCD”. You
can specify up to 8 timer settings.
