A SERVICE OF

logo

19
Chapter5Reference
4.
Install the new fan.
Attention
Take care when handling the fan. Dropping or imparting physical shocks to the fan may damage it.
Pay attention to the orientation of the fan when installing it.
1. Fix the fan to the monitor using the screws removed in step 3 (page 18) (recommended torque: 8.0 ± 2
kgf•cm/ 0.78 ± 0.2 N•m).
2. Connect the cable to the monitor.
Securely connect the connector to the monitor.
2.
2.
1.
1.
Orientthelabel
surfaceoutwards
Connector
Connector
5.
Install the fan cover.
Fix the cover to the monitor using the screws removed in step 2 (page 18).
Attention
Orient the air outlets downwards when installing the cover.
Airoutlets
6.
Install the monitor into the enclosure.