10
Chapter2MonitorAdjustmentandSettings
2-4. Resetting Brightness (Brilliance)
Reset the setting value for the screen brightness (brilliance) to the default setting.
Attention
• Settings cannot be recovered once this function is executed.
Procedure
1. Press
while holding down or on the front of the monitor.
The setting value for the screen brightness (brilliance) is reset to the default setting.
2-5. Displaying Monitor Information
Display the input connector, input signal, and resolution.
Procedure
1. Press
on the front of the monitor.
The monitor information appears.
When analog signals are input, the monitor information appears after automatic screen adjustment.
Note
• The monitor information is displayed for about 10 seconds. Turn off the displayed monitor information by pressing again.
2-6. Locking Buttons
Lock the operation buttons on the front of the monitor.
Procedure
1. Press
on the front of the monitor for 5 seconds or more to turn off the monitor.
2. While holding down
or , press on the front of the monitor for at least two seconds to turn on the
monitor.
The operation buttons are locked.
Note
• If buttons are pressed while locked, “Locked” is displayed on the screen.
• To disable the lock, press
while holding down or for at least two seconds.
