12
MAINTENANCE
ABOVE DECK OIL CHANGE
1. Place 12mm (inside diameter) tube onto outlet of
above deck oil change tap. Fig. 11A
2. Push and turn tap to allow oil to ow. Fig 11B
3. Ensure oil is drained into a suitable container for
proper disposal.
Note To ensure full drainage of oil sump it may
be necessary to prop up the wheels on the
opposite side of mower so that the engine is
tilted towards the outlet.
UNDER DECK WASH CONNECTOR
1. Attach click on hose tting to the connector.
(Fig.11C)
2. Start mower and set engine speed control to FAST.
3. Turn hose on.
4. Allow approximately ONE MINUTE to clean the
underside of the deck.
5. Turn off hose and stop engine.
6. Disconnect hose from mower.
7. Allow mower to dry before storage.
AU
18
MAINTENANCE
ABOVE DECK OIL CHANGE
1. Place 12mm (inside diameter) tube onto outlet of
above deck oil change tap. Fig. 11A
2.
3. Ensure oil is drained into a suitable container for
proper disposal.
Note To ensure full drainage of oil sump it may
be necessary to prop up the wheels on the
opposite side of mower so that the engine is
tilted towards the outlet.
UNDER DECK WASH CONNECTOR
1 .
2. Start mower and set engine speed control to FAST.
3. Turn hose on.
4. Allow approximately ONE MINUTE to clean the
underside of the deck.
5. Turn off hose and stop engine.
6. Disconnect hose from mower.
7. Allow mower to dry before storage.
Fig. 11A
Fig. 11B
Fig. 11C
