Chapter 3
Advanced Configuration
25
Simultaneous Dual-Band Wireless-N Router
Internet MAC Address This is the Router’s MAC Address,
as seen by your ISP.
Server Name This is the specific name that will be used
for the network storage FTP and Media Server. You entered
this name on the Storage > Administration tab.
Host Name If required by your ISP, this would have been
entered on the Setup tab.
Domain Name If required by your ISP, this would have
been entered on the Setup tab.
Internet Connection
Connection Type
This section shows the current network information
stored in the Router. The information varies depending on
the Internet connection type selected on the Setup > Basic
Setup screen.
Select Release IP Address or Renew IP Address as
appropriate to release or renew a DHCP lease.
Click Refresh to update the on-screen information.
Status > Local Network
The Status > Local Network screen displays information
about the local network.
Status > Local Network
Local Network
Local MAC Address The MAC Address of the Router’s
local interface is displayed.
Router IP Address This shows the Router’s IP address, as
it appears on your local network.
Subnet Mask The Router’s Subnet Mask is displayed.
DHCP Server The status of the Router’s DHCP server
function is displayed.
Start IP Address For the range of IP addresses used by
devices on your local network, the beginning IP address
is displayed.
End IP Address For the range of IP addresses used by
devices on your local network, the ending IP address is
displayed.
DHCP Client Table Click DHCP Client Table to view the
DHCP Client Table. It lists computers and other devices
that have been assigned IP addresses by the Router.
For more information, click Help.
Status > Wireless Network
The Status > Wireless Network screen displays the status
information of your 5 GHz and/or 2.4 GHz wireless
networks.
Status > Wireless Network
5GHz/2.4GHz Wireless Network
MAC Address The MAC Address of the Router’s wireless
interface is displayed.
Mode The wireless mode (Mixed, Wireless-N Only,
Wireless-G Only, Wireless-B Only, Wireless-A Only or
Disabled) used by the network is displayed.
Net work Name (SSID) The name of the wireless network
or SSID is displayed.
Channel Width The Channel Width setting selected on
the Basic Wireless Settings screen is displayed.
Wide Channel The Wide Channel setting selected on the
Basic Wireless Settings screen is displayed.
Standard Channel The Standard Channel setting
selected on the Basic Wireless Settings screen is displayed.
Security The wireless security method used by the Router
is displayed.
SSID Broadcast The status of the SSID Broadcast feature
is displayed.
For more information, click Help.
