Chapter 5
Configuration Using the Web-based Utility
38
24/48-Port 10/100 + 4-Port Gigabit Resilient Clustering Smart Switch with 2 Combo SFPs
The Bridge Multicast Forward All screen contains the
following fields:
VLAN ID Displays the VLAN for which Multicast
parameters are displayed.
Interface Interfaces with the following configuration
options:
Static The port is user-defined.
Dynamic The port is configured dynamically.
None The port is not configured for Multicast service.
Gigabit Gigabit ports with the following configuration
options:
Static The Gigabit port is user-defined.
Dynamic The Gigabit port is configured dynamically.
None The Gigabit port is not configured for Multicast
service.
LAG LAGs with the following configuration options:
Static The LAG is user-defined.
Dynamic The LAG is configured dynamically.
None The LAG is not configured for Multicast service.
Click Save Settings to save the changes, or Cancel
Changes to cancel the changes.
SNMP
The SNMP tab includes the following screens: Global
Parameters, Views, Group Profile, Group Membership,
Communities, Notification Filter, and Notification Recipient.
SNMP > Global Parameters
SNMP > Global Parameters
•
•
•
•
•
•
•
•
•
The Global Parameters screen contains parameters for
defining SNMP notification parameters.
Local Engine ID Indicates the local device engine ID. The
field value is a hexadecimal string. Each byte in hexadecimal
character strings consists of two hexadecimal digits. Each
byte can be separated by a period or a colon. The Engine
ID must be defined before SNMPv3 is enabled. For stand-
alone devices, select a default Engine ID that is comprised
of Enterprise number and the default MAC address. For a
stacked system, configure the Engine ID, and verify that
the Engine ID is unique for the administrative domain.
This prevents two devices in a network from having the
same Engine ID.
Use Default Uses the device generated Engine ID. The
default Engine ID is based on the device MAC address and
is defined per standard as:
First 4 octets First bit = 1, the rest is IANA Enterprise
number.
Fifth octet Set to 3 to indicate the MAC address that
follows.
Last 6 octets MAC address of the device.
SNMP Notifications Indicates if the device can send
SNMP notifications.
Authentication Notifications Indicates if SNMP
Authentication failure notification is enabled on the
device.
SNMP > Views
The SNMP Views screen provides access or block access to
device features or feature aspects. For example, a view can
be defined that states that SNMP Group A has Read Only
(R/O) access to Multicast groups, while SNMP Group B
has Read-Write (R/W) access to Multicast groups. Feature
access is granted via the MIB name, or MIB Object ID.
SNMP > Views
•
•
•
