Setting up the network printer
Paper handling
Maintenance
Troubleshooting
Administration
Index
44
Printing
www.lexmark.com
Lexmark E320/E322 Printer
Error conditions
What shows on the
four indicator lights
Description Cause and solution
binary 12 (for 0.25 sec),
binary 3 (for 0.25 sec),
repeat continuously.
Serious failure.
The print server is
unable to recover.
Unrecoverable software error. Call Customer
Support.
binary 15 (for 0.25 sec),
binary x (for 0.25 sec),
repeat continuously.
where x could be 0, 1,
2, 3, 4, 5, 6, 7, 8, or 9
POST error Power-on self test error. During start-up, a
hardware failure was detected on the print
server.
• Press the Menu and Test buttons
simultaneously to reset the print server.
• If the problem reoccurs, call Customer
Support.
binary 9 (for 1 sec)
binary 6 (for 1 sec)
repeat continuously.
The print server is not
connected to the
network.
Print a network setup page and look under
Status. If it shows the printer server is not
connected:
• Make sure the Ethernet cable is firmly
plugged in.
• Try another wall outlet.
▲
