Setting up the network printer
Paper handling
Maintenance
Troubleshooting
Administration
Index
36
Printing
www.lexmark.com
Lexmark E320/E322 Printer
5 If prompted to select a PPD (PostScript Printer Description), you need to install the
proper PPD from the drivers CD. To do this, launch the CD, click Installer, select the
appropriate PPD for your printer, and then click Install. Go back to the Chooser and
try to create the new printer again.
Note: A PPD describes the printer or printer family. For example, the PPD lists which
options are valid for the printer.
6 Look for an icon in the Chooser next to the printer name. This means you have
successfully set up the new printer and a new desktop printer icon is on your desktop.
7 In the Chooser, select the printer you want to use and then close the Chooser window.
Changing the zone
If you want to change the zone of the new printer using MarkVision, find the printer in the
main MarkVision window, select it from the list and choose Adapter Settings.
1 If you haven’t already done so, install MarkVision. On the drivers CD, click Install
printer software. Do a Custom Install and select MarkVision.
2 Launch MarkVision.
3 Click View, and then Select Zones.
4 Select the zone that contains the new printer.
