Kenwood KDC-MP745U Manual

A SERVICE OF

next previous

50

|

KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U

Bluetooth Setup

Function of KDC-X994/ KDC-BT945U

KDC-X794/ KDC-MP745U with KCA-BT200 (Optional Accessory)

Registering PIN Code

By operating the Bluetooth device, specify the PIN

code necessary for registering this unit.

1

Enter Bluetooth mode

KDC-X994 KDC-BT945U

Press the [ ] button.

KDC-X794 KDC-MP745U

Press the [PLAY MODE] button for at least 1

second.

✍ You can also select from “Settings” in Menu List

mode.

2

Enter PIN code edit mode

Turn the [VOL] knob and press it when the

desired item is displayed.

Select “BT Settings” > “Detailed Setup” > “PIN

Code Edit”.

The current setting of PIN code is displayed.

3

Input the PIN code

Operation type Operation

Select the numbers. Turn the [VOL] knob.

Move to the next digit. Press the [

¢

] button.

Delete the last digit. Press the [

4

] button.

4

Register a PIN code

Press the [VOL] knob for at least 1 second.

If “Completed” is displayed, registration is

completed.

5

Exit BT Settings mode

KDC-X994 KDC-BT945U

Press the [ ] button.

KDC-X794 KDC-MP745U

Press the [PLAY MODE] button for at least 1

second.

⁄

• Bydefault,“0000”isspecified.

• APINcodecanbespecifiedwithuptoeightdigits.

Selecting the Bluetooth device You

Wish to Connect

When two or more Bluetooth devices have already

been registered, you need to select the Bluetooth

device you wish to use.

1

Enter Bluetooth mode

KDC-X994 KDC-BT945U

Press the [ ] button.

KDC-X794 KDC-MP745U

Press the [PLAY MODE] button for at least 1

second.

✍ You can also select from “Settings” in Menu List

mode.

2

Select Bluetooth device selection mode

Turn the [VOL] knob and press it when the

desired item is displayed.

Cell-phone

Select “BT Settings” > “Phone Selection”.

Audio player

Select “BT Settings” > “Audio Selection”.

3

Enter Bluetooth device selection mode

Press the [VOL] knob for at least 1 second.

“(name)” is displayed.

4

Select the Bluetooth device

Turn the [VOL] knob.

5

Set up the Bluetooth device

Press the [4] or [¢] button.

“✱(name)” or “-(name)” is displayed.

“✱”: The selected Bluetooth device is busy.

“-”: The selected Bluetooth device is on standby.

“ “ (blank): The Bluetooth device is deselected.

6

Exit BT Settings mode

KDC-X994 KDC-BT945U

Press the [ ] button.

KDC-X794 KDC-MP745U

Press the [PLAY MODE] button for at least 1

second.

⁄

• IfaBluetoothdeviceisalreadyselected,deselectit,and

then select a different one.

• Ifyoucannotselectadeviceusingtheaudioplayer,

connect the device with the audio player.