34
6 DSC OPERATION
New2001
DD
Receiving a Geographical Area call
While monitoring Channel 70 and a Geographical Area call
(for the area you are in) is received:
➥ Emergency alarm or beeps sound depending on the re-
ceived category.
➥ “
RReecceeiivveedd GGeeooggrraapphhiicc
” appears in the display.
➥ Push [CLR] to stop the beep, then push [ENT] to change
to the channel specified by the calling station for voice
communication; push other key to ignore the Geographi-
cal Area call.
➥ Monitor the selected channel for an announcement from
the calling station.
When no GPS receiver is connected or if there is a prob-
lem with the connected receiver, all Geographical Area
calls are received, regardless of your position.
DD
Receiving a Position Request call
While monitoring Channel 70 and a Position Request call is
received:
➥ “
RReecceeiivveedd PPOOSS RReeqquueesstt
” appears in the display.
➥ Push [CLR] to stop the beep, then push [ENT] to reply to
the call; push [CLR] to ignore the call.
DD
Receiving a Position Report call
While monitoring Channel 70 and a Position Report call is re-
ceived:
➥ “
RReecceeiivveedd PPOOSS RReeppoorrtt
” appears in the display.
➥ Push [CLR] to stop the beep, then push [ENT] to reply to
the call; push [CLR] to ignore the call.
• After transmitting a reply call, push [ENT] to display the position
information, or push [CLR] to exit the condition.
25W INT
TAG
Received
POS Report
<Paul
<CLR
˘
Beep Off> SAFETY
25W INT
TAG
Received
POS Request
<Paul
<CLR
˘
Beep Off> SAFETY
25W INT
TAG
Received
Geographic
<Osaka Bay
<CLR
˘
Beep Off> SAFETY
!IC-M603.qxd 06.7.28 1:46 PM Page 34 (1,1)
