2 TABLE OF CONTENTS
3 Introduction
4 Safety Information
4 Unpacking
5 Front Panel Controls
7 Rear Panel Connections
10 Main Remote Control Functions
14 Zone II Remote Control Functions
16 Installation and Connections
16 Audio Connections
16 Video Connections
17 HDMI Connections
18 SCART A/V Connections
20 System and Power Connections
21 Speaker Selection
21 Speaker Placement
23 System Configuration
23 First Turn On
23 Using the On-Screen Display
23 System Setup
24 In/Out Input Setup
26 Video Monitor Settings
27 Audio Setup
27 Surround Setup
29 Night Mode Settings
29 Using EzSet/EQ
32 Manual Setup
33 Speaker Setup
35 Delay Settings
36 Output Level Adjustment
37 Additional Input Adjustments
38 Operation
38 Surround Mode Chart
40 Basic Operation
40 Source Selection
40 6/8-Channel Direct Input
41 Controls and Use of Headphones
41 Surround Mode Selection
42 Digital Audio Playback
42 Dolby Digital
42 DTS
42 PCM Audio Playback
43 Selecting a Digital Source
43 Digital Bitstream Indicators
43 USB Playback
44 Speaker/Channel Indicators
44 Night Mode
45 Using The Bridge™
45 Tape Recording
45 Front Panel Input/Output Connections
46 Output Level Adjustment with Source
46 EzSet/EQ Operation on/off Signals
46 Dim Function
46 Memory backup
47 Advanced Features
47 Front Panel Display Fade
47 Display Brightness
47 Turn-On Volume Level
48 Semi-OSD Settings
48 Full-OSD Time Out Adjustment
48 DMP The Bridge Auto Power
49 Multiroom Operation
50 Infrared Output Selection
51 Tuner Operation
51 Basic Tuner Operation
51 Station Selection
51 Preset Tuning
Table of Contents
Typographical Conventions
In order to help you use this manual with the remote control, front-panel controls and rear-panel
connections, certain conventions have been used.
EXAMPLE – (bold type) indicates a specific remote control or front-panel button, or rear-panel
connection jack
EXAMPLE – (OCR type) indicates a message that is visible on the front-panel information display
EXAMPLE – (Synchro type) indicates a message that is displayed on the remote control’s LCD screen
1
– (number in a square) indicates a specific front-panel control
0
– (number in a circle) indicates a rear-panel connection
0
– (number in an oval) indicates a button or indicator on the remote
A – (letter in an oval) indicates a button on the Zone II remote
51 RDS Operation
51 RDS Tuning
51 RDS Display Options
52 Program Search
53 Programming the Remote
53 Configuring the Remote
53 Preprogrammed Code Entry
54 Automatic Code Entry
54 Learning Commands
55 Learning Codes for an Input Selector
55 Device Priority
56 Macro Programming
58 Punch-Through Configuration
59 Renaming
61 Resetting the Remote
61 Backlight Options
63 Troubleshooting Guide
63 Processor Reset
64 Appendix
67 Technical Specifications
Declaration of Conformity
We, Harman Consumer Group, Inc.
2, route de Tours
72500 Château-du-Loir,
FRANCE
declare in own responsibility, that the product described in
this owner’s manual is in compliance with technical
standards:
EN 55013:2001+A1:2003
EN 55020:2002+A1:2003
EN 61000-3-2:2000
EN 61000-3-3.1995+A1:2001
EN 60065:2002
Jurjen Amsterdam
Harman Consumer Group, Inc.
07/06
The appearance of the text or cursor for your receiver’s on-screen menus may vary slightly from the
illustrations in this manual.Whether the text appears in all uppercase or upper- and lowercase
characters, performance and operation remain the same.
29851_AVR645_ENG 30/10/06 9:46 Side 2
