F - 160 Operation and Maintenance Manual
© GBC Pro - Tech August 1999 Page 6 - 47
Applications
c) Peel back about 1 in. of the release liner from
the decal and fold back. Refer to Figure
6.5.10
Figure 6.5.10 Peel back release liner
Release liner
Back of Image
Leading edge
d) Place a padded paper weight or similar object
in the center. This will help hold the image in
place.
e) From the center, use one finger to tack down
the leading edge of the decal to the leading
edge of the substrate. Refer to Figure 6.5.11
Figure 6.5.11 Tack leading edge
Avoid tacking at the ends first and pressing
towards the center, you may create a tunnel
once you have reached the center. This will
make for a difficult mounting application.
INFORMATION
f) Set the substrate and decal in the center of the
front infeed table.
g) Press STOP.
FWR
REV.
STOP
GO
SPEED
SAFETY
9.0
h) Press FWD
ss
ss
s.
FWR
REV.
STOP
GO
SPEED
SAFETY
9.0
