A SERVICE OF

logo

Garmin G1000H
Pilot’s Guide for the Bell 407GX
190-01255-00 Rev. B462
ADDITIONAL FEATURES
To edit a saved network:
1) While viewing list of saved networks, press the FMS Knob to activate the cursor as seen in Figure 8-102.
2) Turn either FMS Knob to highlight the network to be edited.
3) Pressing the ENT Key at this point will check or uncheck the AUTO CONNECT checkbox. When a checkmark is
present, the system will automatically connect to the network when within range.
Figure 8-102 Select Network to be Edited