19. RECORDING FUNCTIONS
19-7
19.5 Danger Targets Log
The [Danger Targets] log stores information about dangerous targets that are re-
ceived from a radar (TTs) and/or targets that are received from an AIS transponder
(AIS targets).
If a TT or AIS target is within the set CPA (Closest Point of Approach) and TCPA (Time
to CPA), information of all TTs (including non-dangerous targets) are recorded into the
danger target log. This data is as follows:
How to view the danger targets log
To open the [Danger Targets] log, click the [Record], [Target Log] and [Danger Target]
buttons on the InstantAccess bar.
• Date: Date of entry
• Time: Time of entry
• Source: Unit which generated log
• Type: Type of dangerous target
• Latitude and Longitude: Latitude and longitude position of dangerous target
• SPD/kn: Speed of dangerous target
• CRS/°T: Course of dangerous target
• HDG/°T: Heading of dangerous target
• CPA/NM, TCS/min: CPA and TCPA of dangerous target
• Index: Radar target no. (TT), MMSI (AIS)
