3. TARGET TRACKING (TT)
3-9
3.8 How to Display TT Data
3.8.1 How to display target data for individual TT
You can show the data for two (19-inch display) or three (23-inch display) tracked tar-
gets in the TT information window.
By Control Unit
Put the cursor on a target then push the TARGET DATA key.
By trackball
Click the target for which you want to show its data.
Tracked target data
z To erase data from a data box, click the appropriate close data button.
z The basic target data display for a TT consists of the following information:
• TT no. Target numbering starts from "1". When a target is erased the number will
not be reused until the power is re-set or more than 100 targets are acquired.
• Bearing (BRG) and distance (RNG) of the target from own ship
• True speed over the ground (SOG) and true course over the ground (COG) of
the target
• CPA and TCPA. A negative TCPA value means that you have already passed
the closest point and the TT is going away from own ship.
• Bow Closest Range (BCR) and Bow Closest Time (BCT)
Title bar
TT no.
Bearing
Range
Course over ground
Speed over ground
CPA
TCPA
Bow cross range
Bow cross time
