Fujitsu M2488 Manual

A SERVICE OF

next previous

INSTALLATION INSTRUCTIONS M2488 PRODUCT GUIDE

1-20 CG00000-011503 REV. A April 1997

Figure 1-13. Guide Plate Installation

1-6.5.3 Screw Plate Mounting

See Figure 1-14.

1-6.5.4 Attach Mounting Tray

See Figure 1-14.

NOTE: When the mounting hole of the rack is a screw hole, remove the positioning pins at both

the left and right sides of the tray (d) with a screwdriver.

STEP ACTION

1 Each screw plate has nine holes. Mount the screw plate so that the big hole is up.

2 Attach 4 screw plates (g) to the rear of each pole of the rack with two screws (i -SBD-5x2S-M-

NI1A) in the top and bottom holes.

STEP ACTION

1 Insert mounting tray (d) into the 19-inch rack and attach the front with six screws (j - SW2NA-

5x12S-M-NI1A).

2 Attach 2 brackets (f) to both the left and right sides of the tray (d) with six screws (k).

3 Attach brackets (f) to the left and right rear poles of the rack with eight screws (j) and tighten.