ASSEMBLY
OM 0370SB1388-A 21
Installation of Snowblower with Hitch
(Figure 18)
1. Install the 1 1/8" x 6 1/4" lg Cat. 2 pins
(item 2) in the upper holes by first inserting a
bushing (item 3) between each lower hitch
plates and secure with the linchpins (item 4)
as illustrated.
2. Install the 1" x 6 1/16" lg Cat. 2 hitch pin
(item 5) in the lower holes of the upper hitch
by first inserting a bushing (item 6) between
the plates and secure with a linchpin (item 4).
Before connecting snowblower driveline to
tractor drive shaft, make sure driveline is
not too long in raised, lowered and middle
position. If the driveline is too long it must
be shortened, to avoid damaged to tractor.
See pages 22 to 25 for instructions.
3. Connect driveline to tractor drive P.T.O.,
making sure the driveline is properly
engaged.
CAUTION
Figure 18
