A SERVICE OF

logo

ASSEMBLY
OM 0370SB1388-A 19
Installation of Drift Cutter Kit RDF0014
(Figure 16)
1. Enlarge the top and bottom holes on each
side of the snowblower to 1/2". Install the
knives (items 1-2) on the exterior of each
snowblower side by aligning the top and
bottom holes and fasten with the plow bolts,
lockwashers and nuts (items 3-4-5).
2. Using the knives as templates, drill the four
missing holes and fasten as indicated in
step 1.
Figure 16