A SERVICE OF

logo

Open as PDF
next previous
258
<class-map-name> is the name of an existing DiffServ class.
Note: The class name 'default' is reserved and is not allowed here. This command may be
issued at any time; if the class is currently referenced by one or more policies or by any other
class, this deletion attempt shall fail.
Command Mode
Global Config
5.12.2.3 class-map rename
This command changes the name of a DiffServ class.
Syntax
class-map rename <class-map-name> <new-class-map-name>
<class-map-name> is the name of an existing DiffServ class.
<new-class-map-name> is a case-sensitive alphanumeric string from 1 to 31 characters
uniquely identifying the class.
Note: The class name ‘default’ is reserved and must not be used here.
Default
None
Command Mode
Global Config
5.12.2.4 match any
This command adds to the specified class definition a match condition whereby all packets
are considered to belong to the class.
Syntax
match any
Default
None